Project Description
ZFM-1080BN
Automatic Laminating Machine With Flying Knife
Suitable for Glue Base Laminating/Thermal Laminating
1.Automatic Feeder: Adopts offset feeder with servo controlled system and advanced pneumatic mitsubishi side lay, which fastest can feed around 15000 sheet/h. Non-stop and pre-stack feeding can improve work efficiency.
2.Overlapping Regulator: Adopts Servo system to control the overlapping that guarantee accurate and stable, and make sure the overlop error within 1.5mm.
3.Drying and Heating System:Bulk 800mm diameter drying roll with telfon coating, that could bring the highest glue drying effect, Large heating roll by electromagnetic heating plus oil heating, guarantee the heating efficiency and make sure laminating quality when run in high speed.
4.Teflon coated drying roll: Exclusive treatment of drying roll with teflon coating that make the roll surface smooth and glue stickless. Compare with chromeplate, the temperature will more balanced.
5.Double metal roll glue coating system: High precison treatment double rolls coating system with Rubber blade (metal blade) that could available for various glue, and also save a lot glue (3-4g/m2)
4.Main Machine Body: Thicken machine wall (25mm thickness) enhances stability and for long time service life.
5. Synchronous Belt Driving System: Special structuredesign in minimum transmission line, adpots synchronous belt to drive the laminating unit to guarantee the high laminating speed with low noise.
6.Pneumatic Pressure System:fully pneumatic system to control the laminating pressure, the pressure would highly uniform and easy to adjust.
7.Man-Machine Interface System: Advanced 10inch color screen with PLC system make the operation easy and convenient.
8.Flying Cutter: Independent touch screen, easy for setting Adopts imported ultrasonic probe with German chain, servo control system with high accuracy.
9.Anti-Curvature Device: Avoid paper curvature and make the paper smooth, especially for thin paper.
10.Corrugrated Delivery:Better and easier for collecting paper.
11.Car Body: Whole machine cover adopts car body, glossy and wear-resisting.
12.Automatic Stacker: Full automatic with sensor to rise and down the paper pile, heighten structure that can load paper pile height in 1060mm, side and front tidy devices to make sure paper pile collect well.
Model | ZFM-1080BN |
Max. Sheet Size | 1050*1000mm |
Min. Sheet Size | 350*295mm |
Paper Thickness | 80-500gsm |
Height of feeding pile | 1060mm |
Height of stacker pile | 1060mm |
Machine speed | 100m/min |
Working speed | 80-100m/min |
Machine power | 65kw |
Working power | 25-30kw/h |
Machine noise | ≤85 dB |
Suitable film material | PET/ PVC/ BOPP/ OPP/ Metallized Film |
Dimension of machine | 11000*2800*2650mm |
Machine weight | 9500kgs |
Stay In Touch